A melt electroblowing line designed from a blank sheet

Solvent-free nanofibers at industrial width.

PP fibers, with no solvent
140 nm
throughput
720 g/h
working width, 1.7 million m²/year design capacity
1,400 mm
from concept to pilot production
24 months
Melt electroblowing head in operation, glowing red above the collector
Melt electroblowing head in operation, glowing red above the collector

The challenge

The brief was green manufacturing: nanofibers without solvents, made from an industrially stable, almost inert polymer. PP does not dissolve at room temperature, so solution electrospinning cannot process it, and no commercially available machine met the brief.

What we did

  • Designed a multi-nozzle spinneret purpose-built for melt electroblowing
  • Designed and integrated a bipolar high-voltage system at +60 kV / −30 kV
  • Engineered a modular heating system: 265 °C for PP, with heater power that scales for higher-melting polymers
  • Automated the line on a Siemens industrial PC with servo drives, data logging and a 20-inch Siemens touchscreen HMI
  • Led the full cycle: 6 months design, 10 months build, 8 months commissioning

The result

The line is in pilot production, spinning PP fibers down to 140 nm at 720 g per hour with no solvent, on a 1,400 mm platform designed for 1.7 million m² a year. Because only the heater power changes between polymers, trials with high-performance PES and PSU are already under way on the same platform.

Electroblowing spinneret head designed in-house
Electroblowing spinneret head designed in-house

Facing something similar?

Tell us about your line or product. We reply within 2 business days.