PA6 nanofiber media beyond HEPA

500× lower penetration at 31% lower pressure drop, independently verified.

efficiency at MPPS, up from 99.985%
99.99997%
E95 efficiency at MPPS, target above 99.995%
99.9986%
pressure drop
350 → 240 Pa
to series production
5 months

The challenge

A producer running two Nanospider NS1600-8S lines was making PA6 nanofiber media at 99.985% efficiency at MPPS and 350 Pa. Poor uniformity and lamination equipment that was never designed for this product kept it far from the target: 99.99995% at MPPS, an E95 efficiency above 99.995% to stay safe after pleating, and a pressure drop below 240 Pa.

What we did

  • Reformulated the PA6 solution chemistry
  • Ran a structured DOE to bring fiber diameter below 90 nm and hold total nanofiber basis weight at 0.45–0.50 gsm
  • Designed a five-layer substrate–nano–substrate–nano–substrate structure
  • Replaced only the lamination system, leaving the main line frame untouched
  • Validated at the client's lab on a Palas MFP Nanoplus, then confirmed by an independent laboratory in Germany

The result

At a line speed of 2.7 m/min, the media now reaches 99.99997% efficiency at MPPS at 240 Pa, with an average fiber diameter of 80 nm. Its E95 efficiency at MPPS is 99.9986%, well above the 99.995% target that keeps the media safe after pleating. Penetration is 500 times lower than at the start, pressure drop is 31% lower, and the product went into series production five months after the project began, with the main line frame untouched.

Efficiency figures refer to flat-sheet media tested to EN 1822. EN 1822 filter classes apply to finished filter elements.

Facing something similar?

Tell us about your line or product. We reply within 2 business days.